5
To stop RMS Dubbing
Press x on deck B. The RMS program remains even after RMS Dubbing stops.
Tips
•You can insert a blank space of 4 seconds or more on the tape in deck B by pressing W REC MUTING after Step 4.
For details, see “Inserting a blank space during recording (Record Muting)” on page 16.
•A blank of 10 seconds is automatically inserted on the tape when you start RMS Dubbing if:
–you load a new cassette into deck B.
–the tape in deck B is completely rewound to its beginning and automatically stopped.
Inserting a blank space
during recording
— Record Muting
You can insert a blank space of 4 seconds between the tracks. The blank spaces allow you to locate the start of specific tracks afterwards using the
1 Follow Steps 1 to 5 of “Recording on a tape” on page 10.
Recording starts.
2 Press W REC MUTING where you want to load a blank space.
“REC” flashes in the display and a blank is recorded on the tape.
After 4 seconds, X lights up and the tape deck changes to recording pause.
3 Press X PAUSE to resume recording.
Tip
If you want to insert a blank space longer than 4 seconds, hold down W REC MUTING as long as you want. After 4 seconds, “REC” flashes faster.
When you release W REC MUTING, Xlights up and the tape deck changes to recording pause.
Press XPAUSE to resume recording.
16