To program the same track again, press SET once more.
1 3 HFRONT |
|
|
|
|
|
|
|
|
|
|
RMS | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 11 12 13 14 |
BACK |
|
|
|
|
|
|
|
|
|
|
Track number
Order on the program
5 Repeat Steps 2 to 4 to program more tracks.If “FULL” appears in the display
This means that you’ve already programmed 28 tracks and can’t program any more.
6 Press RMS/START to start RMS Play.The peak level meters appear in the display.
To stop RMS PlayPress x(CLEAR) once. The RMS program still remains. To resume RMS play, press RMS/START.
To cancel RMS PlayPress x(CLEAR) repeatedly until the peak level meters appear in the display or eject the tape in deck A. When RMS Play is canceled, the RMS program is automatically erased.
To alternate between the RMS and peak level meter displaysPress DISPLAY.
Tip
To play the program again after RMS Play ends, press RMS/START.
Notes
•During RMS Play, you can only use CHECK, DISPLAY, and xon deck A, and x, m, and M on deck B.
•The RMS function may not work properly if a blank space between tracks is short.
•If there is a long blank space between tracks, the deck may
•If your program includes a number for a track that does not exist, the deck will skip that number during RMS Play.
Press CHECK.
Each time you press this button, the display shows the track numbers in the order they were programmed. After the last track in the program, “End” appears in the display.
Adding tracks to the end of a programPress x(CLEAR) once, and follow Steps 2 to 5 in “Creating your own program (RMS Play)” on page 8.
Note
For more information on the availability of Sony stereo receiver remotes with RMS capability, contact your nearest Sony dealer.
a Playing Tape
9