The front side | H on deck A |
The reverse side | h on deck B |
|
|
To stop Relay Recording
During | Press |
Recording on deck A | x on deck A |
|
|
Recording on deck B | x on deck B |
|
|
Note
Make sure that H on deck B appears in the display. If it doesn’t, press H on deck B once; otherwise, Relay Recording stops when the reverse side of the cassette in deck B finishes.
Recording the same
source on both decks
— Simultaneous Recording
You can record the same source on cassettes in deck A and B at the same time.
1 Load blank cassettes into both decks.
Make sure that
2 Select the Dolby NR (see page 10).
3 Select the side(s) to be recorded on.
To record on | Set DIRECTION MODE to |
Only one side | g |
|
|
Both sides | s |
|
|
4 Press A+B REC.
Both decks change to recording pause.
5 Start playing the program source.
6 Adjust the recording level manually, if necessary (see page 11).
7 Select the side you want to start recording from on both decks.
To record from | Press |
The front side | H |
|
|
The reverse side | h |
|
|
8 Press X PAUSE on deck B.
Simultaneous Recording starts.
To stop Simultaneous Recording
Press x on both decks.
Tip
During Simultaneous Recording, XPAUSE and W REC MUTING on deck B control both decks, but not
XPAUSE and W REC MUTING on deck A.
on Recording Tape a
15