Playing a Tape
Playing a tape
1
2 Press POWER, and press A fully to open the cassette holder, then load a cassette.
With the side you want to play facing you
3 Set DIRECTION MODE.To play back | Set to |
One side only | g |
|
|
Both sides continuously 1) | s |
Both decks in succession 1) RELAY
1)The deck automatically stops after playing back five times.
4 Press H.The deck starts playing. Adjust the volume on the amplifier.
Do not press POWER or Awhile the tape deck is operating. If you do so, the tape may be damaged.
To | Press |
Stop playing | x |
|
|
Start playback from the | h |
reverse side |
|
|
|
Pause | X PAUSE. Press the button |
| again to resume play. |
|
|
M or mwhen the deck | |
| is stopped |
|
|
Take out the cassette | A after stopping playing |
|
|
Tips
•Push in PITCH CONTROL to activate the Pitch Control function and turn the control clockwise to raise the pitch or counterclockwise to lower it.
You can adjust the pitch during playback on deck A or
2)
•To play a tape recorded with the Dolby3) NR, set DOLBY NR to ON
3)“Dolby”, “HX Pro”, and the
7