Other Operations
Using the Sleep TimerYou can set the receiver to turn off automatically at a specified time.
After pressing ALT (page 33), press SLEEP while the power is on.
Each time you press the button, the display changes cyclically as follows:
tOFF
The display dims after you have specified the time.
Tip
To check the remaining time before the receiver turns off, press ALT, then SLEEP. The remaining time appears in the display.
Adjustments using theSET UP menuThe SET UP menu allows you to make the following adjustments.
1
“SET UP ”.
2
3 Press B or b to select the setting you want.
The setting is entered automatically.
4 Repeat steps 2 to 3 until you have set all of the parameters that follow.
Initial settings
Parameter | Initial setting |
AUTO | |
|
|
AUTO | |
|
|
DEC. XXXX | PCM (for DVD), |
| AUTO (for TV/SAT) |
|
|
xAudio input mode for DVD function
Lets you select the audio input mode for DVD function.
•“AUTO” gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected.
•“OPT” specifies the digital audio signals input to the DIGITAL DVD OPT IN jacks.
•“COAX” specifies the digital audio signals input to the DIGITAL DVD COAX IN jacks.
•“ANLG” specifies the analog audio signals input to the DVD IN (L/R) jacks.
xAudio input mode for TV/SAT function
Lets you select the audio input mode for TV/ SAT function.
•“AUTO” gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected.
•“OPT” specifies the digital audio signals input to the DIGITAL TV/SAT OPT IN jacks.
•“ANLG” specifies the analog audio signals input to the TV/SAT IN (L/R) jacks.
continued
Operations Other