Sony TRV340, TRV740, TRV840 (4) Confirming VCR operation, When the VCR does not operate correctly, Dubbing only desired scenes – Digital program editing (on tapes)

Dubbing only desired scenes – Digital program editing (on tapes)

(4) Confirming VCR operation

1Insert a recordable tape into the VCR, then set to recording pause.

2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial. 3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.

If the VCR starts recording, the setting is correct.

When recording is finished, the indicator changes to COMPLETE.

Editing

2					3
	VIDEO EDIT		0:08:55:06			VIDEO EDIT		0:08:55:06
		EDIT SET				EDIT SET
		CONTROL					CONTROL
		ADJ TEST					ADJ TEST
		”CUT–IN”					”CUT–IN”
		”CUT–OUT”		ENGAGE			”CUT–OUT”
		IR SETUP		REC PAUSE			IR SETUP
		PAUSEMODE					PAUSEMODE	COMPLETE
		IR TEST		RETURN			IR TEST
		RETURN		EXECUTE			RETURN
	[MENU] : END					[MENU] : END

When the VCR does not operate correctly

•After checking the code in “About IR SETUP codes”, set the IR SETUP or the PAUSEMODE again.

•Place your camcorder at least 30 cm (12 in.) away from the VCR.

•Refer to the operating instructions of your VCR.

79