Sony TRV340, TRV740, TRV840 (2), Notes, When fading out [b], (1) When fading in [a], Using the fader function, To cancel the fader function, When you select OVERLAP, WIPE, or DOT

Using the fader function(1) When fading in [a]

In the standby mode, press FADER until the desired fader indicator flashes.

When fading out [b]

In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows:

FADER t M.FADER t BOUNCE t MONOTONE no indicator T DOT T WIPE T OVERLAP

The last selected fader mode is indicated first of all.

(2) Press START/STOP. The fader indicator stops flashing.

After fade in/out ends, your camcorder automatically returns to the normal mode.

1

FADER

FADER

To cancel the fader function

Before pressing START/STOP, press FADER repeatedly until the indicator disappears.

Notes

•The overlap, wipe and dot functions work only for tapes recorded in the Digital8 system.

•You cannot use the following functions while using the fader function. Also, you cannot use the fader function while using the following functions:

–Digital effects

–Color Slow Shutter

–Super NightShot

–Photo recording

–Interval recording

–Frame recording

When you select OVERLAP, WIPE, or DOT

Your camcorder automatically stores the picture recorded on tape. While the picture is being stored, the indicators flash fast, and the picture from the tape appears on the screen. At this stage, the picture may not be recorded clearly, depending on the tape condition.

Operations Recording Advanced

45