Sony DCR-TRV75, TRV80 To cancel searching, Searching a recording by date – Date search, Searching for the date without using Cassette Memory

Searching a recording by date – Date searchSearching for the date without using Cassette Memory

The POWER switch should be set to .

Operate by touching the panel.

(1) Press FN to display PAGE1.

(2) Press MENU to display the menu.

(3) Select CM SEARCH in , then press EXEC (p. 178).

CM SET			EXIT
	TITLE
	TITLEERASE
	TITLE DSPL
	CM SEARCH	ON
	TAPE TITLE	OFF
	ERASE ALL

EXEC RET.

(4) Select OFF, then press EXEC.

(5) Press SEARCH MODE on the Remote Commander, until the DATE SEARCH indicator appears.

(6) Press . on the Remote Commander to search for the previous date or press

>on the Remote Commander to search for the next date. Your camcorder automatically starts playback at the point where the date changes. Each time you press . or >, your camcorder searches for the previous or next date.

To cancel searching

Press x on the Remote Commander or on your camcorder.

Note

If one day’s recording is less than two minutes, your camcorder may not accurately find the point where the recording date changes.

If the tape has a blank portion between recorded portions

Date search may not work correctly.

Cassette Memory

The cassette with Cassette Memory can hold six recording date data. If you search the date among seven or more data, see “Searching for the date without using Cassette Memory.”

Operations Playback Advanced

75