Self-timer recording

START/STOP PHOTO

PHOTO

START/STOP

Recording on the tape

The POWER switch should be set to .

Operate by touching the panel.

(1) During standby, press FN and select PAGE2.

(2) Press SELFTIMER.

The (self-timer) indicator appears on the screen. (3) Press EXIT to return to FN.

(4) Press START/STOP.

The self-timer starts counting down from about 10 while beeping. In the last two seconds of the countdown, the beep gets faster, then recording starts automatically.

Recording still images on the “Memory Stick” during recordingstandby

The POWER switch should be set to

.

Operate by touching the panel.

 

(1) Follow the step 1 to 3 in “Recording on the tape.”

(2) Press PHOTO deeply.

 

The self-timer starts counting down from about 10 while beeping. In the last two seconds of the countdown, the beep gets faster, then the recording starts automatically.

To stop the countdown for recording on the tape

Press START/STOP. To restart the countdown, press START/STOP again.

To cancel the self-timer

With your camcorder during standby, press SELFTIMER and the (self-timer) indicator disappears from the screen. You cannot cancel the self-timer using the Remote Commander.

Notes

•The self-timer recording is automatically canceled when self-timer recording is finished.

 

•You can record using the self-timer only during recording standby.

 

When the POWER switch is set to MEMORY

46

You can also record still images onto the “Memory Stick” with the self-timer (p. 122).