Sony DCR-TRV75, TRV80 To finish making programs, Operation 1: Making a Program, Dubbing only desired scenes – Digital program editing (on tape)

Dubbing only desired scenes – Digital program editing (on tape)

Operation 1: Making a Program

The POWER switch should be set to .

Operate by touching the panel.

(1) Insert the cassette for playback into your camcorder, and insert the tape for recording into the VCR.

(2) Press FN to display PAGE1.

(3) Press MENU to display the menu.

(4)	Select VIDEO EDIT in , then press EXEC (p. 182).
(5)	Select TAPE, then press EXEC.

(6)	Search for the beginning of the first scene you want to insert using the video
	control buttons on the screen, then pause playback. You can fine-adjust one
	frame at a time with	/	.
(7)	Press MARK IN on the screen or MARK on the Remote Commander.
	The IN point of the first program is set, and the upper part of the program

mark changes to light blue.

(8) Search for the end of the first scene you want to insert using the video control buttons on the screen, then pause playback. You can fine-adjust one frame at

a time with / .

(9) Press MARK OUT on the screen or MARK on the Remote Commander.

The OUT point of the first program is set, then the lower part of the program mark changes to light blue.

(10) Repeat step 6 to 9.

When one program is set, the program mark changes to light blue. You can set 20 programs in maximum.

4		EXIT	5			7
OTHERS			V I DEO ED I T		0:32:30:14	V I DEO ED I T		0:08:55:06
DATA CODE
BEEP			MARK	START	ED I T UNDO	MARK	START	ED I T UNDO
COMMANDER			IN		SET	OUT		SET
D I SPLAY	RETURN
V I DEO ED I T
	TAPE
	MEMORY		TOTAL	0:00:00:00		TOTAL	0:00:00:00
			SCENE	0		SCENE	0
	EXEC	RET.			END			END

9		10
V I DEO ED I T	0:09:07:06	V I DEO ED I T	0:10:01:23
MARK START	ED I T UNDO	MARK START	ED I T UNDO
I N	SET	I N	SET
TOTAL 0:00:13:00		TOTAL 0:00:47:12
SCENE 1		SCENE 3
	END		END
To finish making programs
Press	END.

The program is stored in memory until the tape is ejected.

84