Types of trouble and their solutionsSymptomCause and/or Corrective Actions

An unknown picture is displayed on • If 10 minutes elapse after you set the POWER switch to

the screen.

CAMERA or DEMO MODE is set to ON in the menu

 

settings without a cassette inserted, your camcorder

 

automatically starts the demonstration.

 

c Insert a cassette and the demonstration stops.

 

You can also cancel DEMO MODE. (p. 78)

The picture is recorded in incorrect

• NIGHTSHOT is set to ON.

or unnatural colors.

c Set it to OFF. (p. 23)

Picture appears too bright, and the

• NIGHTSHOT is set to ON in a bright place.

subject does not appear on the

c Set it to OFF. (p. 23)

screen.

• The backlight function is active.

 

c Set it off. (p. 23)

The click of the shutter does not

• BEEP is set to OFF in the menu settings.

sound.

c Set it to MELODY or NORMAL. (p. 78)

A horizontal black band appears

• Set STEADYSHOT to OFF in the menu setting. (P. 78)

when shooting a TV screen or

 

computer screen.

 

An external flash (optional) does not • The power of the external flash (optional) is off or the

work.

power source does not installed.

 

c Turn on the external flash or install the power source.

 

• Two or more external flashes (optional) are attached.

 

c Only one external flash (optional) can be attached.

 

• AUTO is selected in FLASH MODE in the menu settings

 

while recording in a bright place.

 

c Set it to ON. (p. 78)

In the playback mode

Symptom

Cause and/or Corrective Actions

The tape does not move when a

• The POWER switch is not set to VCR.

video control button is pressed.

c Set it to VCR. (p. 27)

 

The playback button does not work.

• The tape has run out.

 

 

 

c Rewind the tape. (p. 27)

There are horizontal lines on the

• The video head may be dirty.

picture or the playback picture is

c Clean the heads using the Sony V8-25CLD cleaning

not clear or does not appear.

cassette (optional). (p. 153)

No sound or only a low sound is

• The stereo tape is played back with HiFi SOUND set to 2

heard when playing back a tape.

in the menu settings.

 

 

 

c Set it to STEREO. (p. 78)

 

• The volume is turned to minimum.

 

c Press VOLUME +. (p. 27)

 

• AUDIO MIX is set to ST2 side in the menu settings.

 

c Adjust AUDIO MIX. (p. 78)

The date search does not work

• The tape has a blank portion in the recorded portion.

correctly.

(p. 56)

 

 

The picture which is recorded in the

• PB MODE is set to

 

/

in the menu settings.

 

Digital8 system is not played back.

c Set it to AUTO. (p. 78)

 

The tape which is recorded in the Hi8

• Set PB MODE to

 

 

/

in the menu settings. (p. 78)

 

 

 

/standard 8 system is not played

 

 

 

 

 

 

back correctly.

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

(Continued on the following page) 139