Sony DCR-TRV828, DCR-TRV830, TRV828, TRV830 Access lamp, “Memory Stick” slot, Inserting “Memory Stick”, “Memory Stick” eject button, To eject the “Memory Stick”, Using “Memory Stick”–introduction

Using “Memory Stick”–introduction

Inserting “Memory Stick”

Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the v mark facing toward the “Memory Stick” slot as illustrated below.

“Memory Stick” eject button “Memory Stick” slotAccess lampTo eject the “Memory Stick”

Press the “Memory Stick” eject button. The “Memory Stick” pops up.

When the access lamp is lit or flashing

Do not shake or strike your camcorder because your camcorder is reading the data from the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the power off , eject the “Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.

If “ MEMORY STICK ERROR” is displayed

The “Memory Stick” may be corrupted. If this occurs, use another “Memory Stick.”

90