Checking the recording

– END SEARCH/EDITSEARCH/Rec Review

You can use these buttons to check the recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth.

EDITSEARCH

END SEARCH

END SEARCH

You can go to the end of the recorded section after you record.

Press END SEARCH in the standby mode.

The last 5 seconds of the recorded section are played back and returns to the standby mode. You can monitor the sound from the speaker or headphones.

EDITSEARCH

You can search for the next recording start point.

Hold down the +/– (7) side of EDITSEARCH in the standby mode. The recorded section is played back.

+: to go forward

– : to go backward

Release EDITSEARCH to stop playback. If you press START/STOP, re-recording begins from the point you released EDITSEARCH. You cannot monitor the sound.

Rec Review

 

You can check the section which you have stopped most recently.

 

Press the – (7) side of EDITSEARCH momentarily in the standby mode.

 

The section you have stopped most recently will be played back for a few seconds, and

 

then your camcorder will return to the standby mode. You can monitor the sound from

 

the speaker or headphones.

 

 

 

Notes

 

•END SEARCH, EDITSEARCH and Rec Review work only for tapes recorded in the

 

Digital8 system.

 

•If you start recording after using the end search function, occasionally, the transition

 

between the last scene you recorded and the next scene may not be smooth.

 

•Once you eject the cassette after you have recorded on the tape, the end search

 

function does not work.

 

If a tape has a blank portion in the recorded portions

26

The end search function may not work correctly.