Sony DCR-TRV828, DCR-TRV830, TRV828, TRV830 (1), (2), (1), (2), Notes, To cancel erasing, Erasing all programs, To cancel erasing all programs, Erasing the program you have set

Dubbing only desired scenes – Digital program editing

Erasing the program you have set

Erase OUT first and then IN from the last set program.

(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.

(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. The last set program mark flashes, then the setting is canceled.

To cancel erasing

Select RETURN in step 2.

Erasing all programs

(1) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select ERASE ALL, then press the dial.

(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. All the program marks flash, then the settings are canceled.

To cancel erasing all programs

Select RETURN in step 2.

To cancel a program you have set

Press MENU.

The program is stored in memory until the tape is ejected.

Notes

•The Digital program editing does not work when PB MODE is set to / in the menu settings.

•You cannot operate recording during Digital program editing.

You cannot set IN or OUT to the following portions of the tape:

–a blank portion of the tape

–a portion recorded in a system other than Digital8

The total time code may not be displayed correctly in the following cases:

–there is a blank portion between IN and OUT on the tape

–the tape is not recorded in the Digital8 system.

Editing

(Continued on the following page)

71