Location and Function of Controls

Front Panel

UCP-8060

1System indicator

2Status indicator

3Memory Stick slot

SYSTEM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6Function buttons

 

9Control knobs

 

 

 

 

 

 

 

 

8Display window

 

 

5Jog roller

 

 

 

 

 

 

 

 

 

 

4Jog L, R buttons

7Select L, R buttons

aSystem indicatorLights in red, orange, or green to show the system operation status.bStatus indicator

Lights in red, orange, or green to show the status of access to the memory stick slot or of the internal system.

cMemory Stick slotInsert a Memory Stick with the label side up.

For details, refer to the Installation Manual of the UCP- 8060 or the User’s Guide of the Operation Software used.

dJog L, R buttons

The left button is the jog L button, and the right one the jog R button. Press to change the layer of the menu.

For details, refer to the User’s Guide of the Operation Software used.eJog roller

Turn the roller to select an item or change a value. Press the roller to execute the selection.

For details, refer to the User’s Guide of the Operation Software used.

fFunction buttons

These buttons are called the function 1, 2, … 5 button from the top, and light in red, orange, or green according to the operation status. A function of a button depends on the operation software used.

For details, refer to the User’s Guide of the Operation Software used.

gSelect L, R buttons

The left button is the select L button, and the right one the select R button. Press these buttons to perform the function displayed at the corresponding position on the task bar (page 30). The screen display will change accordingly.

For details, refer to the User’s Guide of the Operation Software used.

hDisplay window

Shows a menu or data. The window functions as a touch panel, and you can select a function by touching an on- screen object representing it. The items displayed depend on the operation software used.

For details, refer to the User’s Guide of the Operation Software used.

28 Location and Function of Controls