Notes on “Memory Stick Duo”

To use “Memory Stick Duo” with your product, attach it to the Memory Stick Duo adapter before inserting it into your product.

Be sure to attach “Memory Stick Duo” to the adapter with the correct orientation.

Be sure to insert the Memory Stick Duo adapter with the correct orientation. Otherwise, the product may be damaged.

Do not insert the Memory Stick Duo adapter without “Memory Stick Duo” attached. Doing so may result in malfunction of the product.

Note on data read/write speed

Data read/write speed may vary depending on the combination of the “Memory Stick” and “Memory Stick” compliant product you use.

What is MagicGate?MagicGate is copyright protection technology that uses encryption technology.Before using a “Memory Stick”

Terminal

Write-protect tab

Labeling position

When you set the “Memory Stick” erasure prevention switch to “ LOCK,” data cannot be recorded, edited, or erased.

Use a sharp object, such as a ballpoint pen, to move the “Memory Stick Duo” erasure prevention switch.

Data may be damaged if:

You remove the “Memory Stick” or turn off the unit while it is reading or writing data.

You use the “Memory Stick” in a location subject to the effects of static electricity or electric noise.

We recommend that you make a backup copy of important data that you record on the “Memory Stick.”

Notes

Do not attach anything other than the supplied label to the “Memory Stick” labeling position.

Attach the label so that it does not stick out beyond the labeling position.
Do not write forcefully on the “Memory Stick Duo” memo area.Carry and store the “Memory Stick” in its case.

Do not touch the connector of the “Memory Stick” with anything, including your finger or metallic objects.

Do not strike, bend, or drop the “Memory Stick.”Do not disassemble or modify the “Memory Stick.”Do not allow the “Memory Stick” to get wet.Do not use or store the “Memory Stick” in a location that is:Extremely hot, such as in a car parked in the sunUnder direct sunlightVery humid or subject to corrosive substancesAbout formatting “Memory Stick”

When “Memory Sticks” are shipped from the factory, they are already formatted to a special standard. When you format “Memory Stick,” we recommend formatting them on this product.

Caution when formatting “Memory Stick” on a personal computer

Pay attention on the following points when formatting “Memory Stick” on a personal computer. Operation of “Memory Stick” formatted on a personal computer is not guaranteed on this product. To use a “Memory Stick” that has been formatted on a personal computer, the “Memory Stick” must be reformatted on this product. If it is not reformatted, all data stored on the “Memory Stick” will be lost.

For details on formatting a “Memory Stick,” see “Formatting a Memory Stick” on page 31.

Status Indicator

If the status indicator is turned on or is flashing, data is being read from or written to the “Memory Stick.” At this time, do not shake the computer or product or subject them to shock. Do not turn off the power of the computer and product or remove the “Memory Stick.” This may damage the data.

Precautions

To prevent data loss, make backups of data frequently. In no event will Sony be liable for any loss of data.

Unauthorized recording may be contrary to the provisions of copyright law.

The “Memory Stick” application software may be modified or changed by Sony without prior notice.

Memory Stick and

are the trademarks of Sony Corporation.

MagicGate Memory Stick and are the trademarks of Sony

Corporation.

38 Using a “Memory Stick”