Removing the Operation Software

You can remove the operation software from the UCP- 8060 following the procedure below.

1 Select the operation software to be removed on the Main Screen.

2 Press the select L button (Menu).

The Menu display appears.

3 Select Remove.

The Remove display appears.

4 Press the select R button (Yes).

The confirmation message appears. Check that the selected software is the one to be removed.

5 Press the select R button (Yes).

The selected operation software is removed. When this is completed, the Main Screen appears.

Updating System Files

The system files, which have been installed at the factory, can be updated.

Note

If you update the system files, all operation software installed in the UCP-8060 is deleted. After updating, reinstalling the operation software is required.

Requirements

•Computer (to enable copying files to a Memory Stick)

•Latest system files

•Operation software (for reinstallation after updating)

•Memory Stick

For details on obtaining the latest system files and operation software, consult your Sony representative.

Checking the current version

It is recommended to check the current version of the system before updating the system files.

For details on checking the version, see “Confirming of the Basic Information” on page 31.

Preparations

1 Format the Memory Stick.

For details on formatting, see “Formatting a Memory Stick” on page 31.

2 Unzip the system files on the computer.

The unzipped data are stored under the directory shown below.

MSSONY/PRO/UCP/

3 Copy the unzipped data, including the folder MSSONY to the Memory Stick.

36 Updating System Files