•Using the USB-Ethernet adaptor reduces battery remaining time, because they share the camcorder’s battery.
•When not using the USB-Ethernet adaptor, disconnect it from your camcorder to prevent your camcorder’s battery from going flat.
•Do not lift your camcorder by the USB-Ethernet adaptor or its cable.
•Do not pull out the connector by pulling the cable.
•Do not bend or apply excessive force to the cable.
•Only connect this USB-Ethernet adaptor to a designated network or telephone line
If you connect the USB-Ethernet adaptor to any of the following networks or telephone lines, an excessive current will flow through the connector leading to breakdown, overheating or fire. In particular, never connect to a home or office telephone line.
-Network other than 10BASE-T and 100BASE-TX type
-Ordinary telephone line
-ISDN (digital) compatible public telephone jack (analog, digital)
-PBX (digital private branch exchange) line
-Home or office telephone line
-Any other type of telephone line
•Avoid incorrect connection
-Do not allow any small pieces of metal inside the connector. A short between pins may lead to fire or breakdown.
-Insert the connector completely straight. Inserting it at an angle can cause a short between pins, which may lead to fire or breakdown.
•Unplug the LAN cable before moving the USB-Ethernet adaptor Moving it with the LAN cable still connected may damage the cable or lead to fire, electric shock, or injury if the USB-Ethernet adaptor drops or falls over. Also be careful not to drop the USB-Ethernet adaptor.
Electromagnetic InterferenceIf you place the USB-Ethernet adaptor close to another electronic device, they may have an adverse effect on each other. In particular, noise from the device may enter a TV or radio if it is placed nearby. If this happens, carry out the following steps:
•Move the USB-Ethernet adaptor as far as possible from the TV or radio.
•Change the direction of the antenna of the TV or radio.
