Troubleshooting

If a problem appears, check the following trouble shooting guide first and perform whatever action is necessary to solve the problem. If the problem persists, turn off the printer and consult with your Sony dealer.

Symptom

Possible causes and remedies

Nothing appears

The POWER switch of the printer is not set

in the printer

to ON.

window display.

tSet the POWER switch of the printer to

 

ON. If the POWER switch is set to ON,

 

once set it to OFF, then to ON again.

 

(page 4)

 

 

 

Connections may not be correct.

 

tMake connections correctly. (page 7)

 

 

The printer does

An error message appears on the printer

not print.

window display.

 

tTake remedies according to “Error

 

Messages.”(page 19).

An ink ribbon cassette and paper are not loaded.

tLoad an ink ribbon cassette and paper. (pages 8 and 9)

Error Messages

If a problem occurs, the ALARM indicator lights and an error message stating the problem appears in the printer window display. Note the message and perform whatever action is necessary to solve the problem.

Error

Possible causes and remedies

messages

 

 

 

END OF

The ink ribbon has been completely used.

RIBBON

tReplace with the new ink ribbon. (Ink

 

ribbons cannot be reused.) (page 8)

 

 

HEAD IN

The thermal head has overheated.

COOLING

tLeave the printer until the head cools

 

down and this message disappears.

 

 

HEAD IN

The thermal head is warming up.

HEATING

tLeave the printer until the head has

 

warmed up and this message disappears.

 

 

NO RIBBON

Ink ribbon cassette is not fitted properly.

 

tEnsure that the ink ribbon is loaded

 

properly in the ink ribbon holder, and

 

the ink ribbon cassette in the printer.

 

(page 8)

 

 

NO IMAGE

No image data is stored in the printer

DATA

memory.

 

tTransfer the image data from your

 

computer. (page 11)

 

 

NO PAPER

The paper has run out.

 

tLoad the paper into the paper tray.

 

(page 9)

 

 

Error

Possible causes and remedies

messages

 

 

 

PLEASE WAIT

When you turn off the power while

 

printing, or the printer detects an invalid

 

combination of the paper and ink ribbon

 

and automatically stops printing, this

 

message appears.

 

tWait for the printer to eject the paper.

 

 

REMOVE

The paper has jammed.

PAPER AND

tRemove jammed paper from the printer

PRESS [g]

and press g button. (page 19)

 

 

RIBBON

The ink ribbon develops some trouble.

ERROR

tEnsure that the ink ribbon does not tear

 

and the ink ribbon cassette and paper

 

tray are loaded properly. (page 9)

 

 

MECHA

The mechanical trouble occurs in the

TROUBLE

printer.

 

tTurn off the power once and then turn it

 

on. If the message will still remain in the

 

printer window display, turn off the

 

power immediately and contact your

 

Sony dealer.

 

 

If the Paper Jams

If the paper jams, printing stops and the error message stating “CHECK PAPER AND PRESS [g]” or “REMOVE PAPER AND PRESS [g]” appears on the printer window display. Follow the steps below to remove the jammed paper.

1 Remove the paper cover.

If any printouts have been ejected on the paper cover, remove them first before removing the paper cover.

2 Check where any paper is jammed inside the printer.

If you find a jammed sheet around the paper outlet, slowly pull it out straightly to the right.

Miscellaneous

Troubleshooting 19