HCursor control buttons (12, 13, 14)

Use these buttons to increase or decrease a value and level shown on the menu, or scroll up and down through a menu.

ICAL (Calibration) button (14)

Press this button to adjust the gray balance.

J PRINT button (11, 14)

Press this button to print the image data stored in the memory of the printer.

KPaper cover (6) Printouts are ejected here.

LPaper tray (6)

Load paper here. Press the point marked with PUSH to remove the paper tray.

Rear

ACable stopper (7)

Fixes the USB cable to prevent it from being disconnected.

BUSB connector (7)

Connects to a computer equipped with the USB interface (which conforms to USB 2.0), using a USB cable (not supplied).

C-AC IN connector (7)

Used to connect to a wall outlet, using the AC power cord supplied.

Introduction

Location and Function of Parts and Controls

5