Connections

After connecting a USB connecting cable (not supplied) to the printer and the computer, connect the power cord. For details about the printer connection, refer to the manuals for the computer or other peripheral devices.

Installing the Printer Driver

Install the printer driver provided with the printer. For detailed instructions on how to install the printer driver, refer to the Readme.txt file and the install manual contained on the CD-ROM disc supplied.

USB Port Connection

Notes

•Follow the connection procedures described in the computer manual.

•Make sure that the interface cable is connected securely at both ends.

•The printer drive software provided with the printer is not suitable for using the printer connected to a network.

•Operation of the printer is not guaranteed for connection to a USB hub.

•Before connecting the unit using a USB cable (not supplied), attach a supplied ferrite core to the end of the cable to be connected to the printer for noise prevention. For detailed information on how to attach the ferrite cores, see “Attaching a ferrite core to a USB cable” on page 7.

UP-D75

to

(USB)

to - AC IN

connector

connector

AC power cord (supplied)

USB

connecting cable (not

supplied)

to wall outlet

Computer

Attaching a ferrite core to a USB cable

Before connecting a USB cable (not supplied) to the printer, you should attach a supplied ferrite core to its cable for noise prevention. To conform to radiation standards, attach the supplied ferrite core to the USB cable of your device as described below.

1 Release two stoppers on the ferrite core to open it.

2 Slip the USB cable through the ferrite core and position it at the base of the USB connector to the printer.

3 Close the ferrite core until you hear a click.

Preparation

Note

When the ferrite core cannot be secure because the USB cable is thin, secure it using a tape.

Securing a USB cable

After you connect a USB cable to the printer, it is recommended that you secure the USB cable to prevent it from being accidentally disonnected using the cable stopper.

Connections 7