4 Load the ink ribbon to ink ribbon holder.

1Load the spool holding the ink ribbon into the right-hand part of the holder, while pressing in the arrow direction.

Ink ribbon holder (supplied)

2 Fit the other

 

spool into the

Bar code

left-hand part of

 

the holder.

 

5 Remove any slack from the ink ribbon.

If the ribbon is left slack, it may be crumpled and damaged when inserted.

“Start” position marker

Wind the spool until the “Start” position marker faces upward.

6 Insert the ink ribbon cassette firmly until it stops.

SONY mark faces forwards.

7 Close the ribbon door.

If your ink ribbon should tear

Repair the tear with transparent tape. There should be no problem with using the remaining portion of the ribbon.

Transparent tape

Remove any slack.

Notes When storing ink ribbons

•Avoid placing the ink ribbon in a location subject to:

–high temperatures

–high humidity

–excessive dust

–direct sunlight

•Store partially used ink ribbon in its original package.

Loading the Paper

Load the paper by the following procedure. Be careful not to touch the printing surface of the paper.

Note

When loading the paper, do not turn off the power. If you turn off the power, the image data stored in the memory will be lost.

1 Press PUSH on the paper tray. The paper tray is ejected.

Remove the printing surface protection sheet, if any.

Paper tray

Operation

Before Printing

9