7 Push the shaft coming out from the left plate in so as to lock the right plate.
10 While holding both ends of the paper from the paper roll, insert the paper between the guide rollers, and feed it in with your hands until the paper end appears on the other side.
Operation
Note
Be careful not to push this lever.
Push here.
Confirm that the white portion appears through these four holes.
Guide rollers
Confirm that the right plate is locked securely.
8 While holding both ends of the paper core shaft with the paper roll, insert it into the printer.
9 Remove the seal attached at the end of the paper.
Seal
11 Insert the paper from the paper roll into the guide plate until you can see the paper through the three holes shown below.
Three holes
When the paper appears through the three holes, the paper from the paper roll is set at the correct position.
12 Loading the Paper Roll and Ink Ribbon