Notes on storage

•Avoid placing the bag in which the paper roll and the ink ribbon are contained where it will be subject to high temperatures, high humidity, dust, or direct sunlight.

•After opening the bag, use the ribbon and the paper roll as soon as possible

•When storing the remaining paper and ink ribbon after partial use, put the ribbon and the paper roll back in their respective bags.

Operation

Printing from the

Computer

Before starting to print

•Confirm that the printer and computer are connected (page 6).

•Confirm that the paper roll and the ink ribbon are correctly installed (page 11).

To adjust the picture quality of a printout You can adjust the picture quality of a printout.

For detailed information, refer to the instructions for the printer driver included on the CD-ROM disc supplied.

To select the lamination type of printout The lamination can be selected between glossy and matte type.

Glossy: Glossy surface

Matte: Foggy pattern surface

The default setting of the lamination type is “Glossy.” For detailed information, refer to the instructions for the printer driver included on the CD-ROM disc supplied.

To select the size of printouts

You can make printouts of either 203 × 254 or 203 × 305

mmsize (8 × 10 or 8 × 12 inch size) using the 2UPC- R710 Self-Laminating Color Printing Pack. 203 × 254 mm size (8 × 10 inch size) is the default setting.

You can select the desired size for your printouts using the printer driver.

For detailed information, refer to the instructions for the printer driver included on the CD-ROM disc supplied.

Printing

Notes

•Do not look into the paper output slot during printing. The sharp edge of the printout may poke your eye or face. This may cause loss of sight. Also, do not insert a foreign object into the paper output slot. The cutter may be damaged or broken and a piece of the cutter can cut you.

•Make sure that the paper scrap tray is not full with the excess portions of margins. If it is almost full, throw the scraps away.

For detailed information, see “When the paper scrap tray is full” on page 17.

•The printout is ejected from the output slot. Be careful to place the printer on a level surface so that the ejected printout will not drop on the floor.

16 Printing from the Computer