Miscellaneous

Precautions

Safety

•Operate the printer using the power source specified in “Specifications” (page 22)

•Be careful not to damage the power cord by placing or dropping heavy objects on it; it is dangerous to use the unit with a damaged power cord.

•If you do not intend to use the unit for a long time, disconnect the power cord.

•Unplug the power cord by grasping the plug, not the cable itself.

•Do not disassemble the unit. There is a danger of electric shock from the internal parts.

•Be careful not to spill water or other liquids on the unit, or to allow combustible or metallic material to enter the cabinet. If used with foreign matter in the cabinet, the unit is liable to fail, or present a risk of fire or electric shock.

•If the unit malfunctions or if a foreign body falls into the cabinet, disconnect the power immediately and consult your Sony service facility or your Sony dealer.

Installation

•Avoid placing the unit in a location subject to:

–mechanical vibration

–high humidity

–excessive dust

–direct or excessive sunlight

–extremely high or low temperatures

•Ventilation holes are provided to prevent the unit from overheating. Be careful not to obstruct them with other objects or by covering the unit with a cloth etc.

Ventilation holes

Ventilation holes

Note

If you obstruct the ventilation holes, the unit may not offer full performance.

On condensation

•If the printer is subjected to wide and sudden changes in temperature, such as when it is moved from a cold room to a warm room or when it is left in a room with a heater that tends to produce quantities of moisture, condensation may form inside the printer. In such cases the printer may not work properly, and may even develop a fault if you persist in using it. If moisture condensation forms, turn off the power and leave the printer standing for at least one hour.

•If the printing pack is subjected to wide and sudden changes in temperature, condensation may form on the ink ribbon or paper. This will cause the printer to malfunction. Also if the printing pack is used in this state, spots are likely to appear on the printout.

•To store a half-used printing pack, replace it in its original packing and reseal the package. If possible, keep the sealed printing pack in a cool, dark location. To subsequently use the printing pack, place it, in its sealed package, in a warm room for several hours. Doing so prevents condensation from forming when the printing pack is removed from its package.

On Transporting the Printer

Do not transport the printer with the supplied accessories attached. Doing so may cause malfunction.

1 Remove the feet, if attached.

2 Open the front door.

3 Remove the ink ribbon and the paper roll.

Note

When handling the paper roll, be sure to put gloves on.

4 Remove the paper roll from the paper core shaft.

Miscellaneous

Precautions 19