Then, the STATUS indicator on the printer lights in blue while the ERROR indicator is still lit in red.

Lit in blue

Lit in red

Load the ink ribbon after you finish loading the paper roll.

White bobbin with a gear

Take-up ribbon

White bobbin

Black bobbin with a gear

Supply-side ribbon

Black bobbin

12 Hold both spools with both hands. Push the bobbin with the gear of the supply-side ribbon into the ribbon gear of the supply side, and then push the

black bobbin of the supply-side ribbon into the black bobbin bearing.

13 Push the bobbin with the gear of the take-up ribbon into the ribbon gear of the take-up side, and then insert the white bobbin of the take-up ribbon into the white bobbin bearing.

Note

After attaching the take-up ribbon, make sure that the ink ribbon does not loosen or is not wrinkled. If the ink ribbon is wrinkled, smooth it by turning the

Operation

Loading the Paper Roll and Ink Ribbon

13