It is recommended that you store the ink ribbon and paper roll in the package they came in after you remove them.
5 Attach the tape next to the left side of the ink ribbon base as illustrated.
Tape
Miscellaneous | 6 Put the large cushion back in place in the front door. |
|
Cleaning the thermal head and paper feeding section
When a vertical white stripe appears on the printout or the color distribution becomes uneven, clean the thermal head and the paper feeding section, such as guide rollers, bottom section and paper tray section.
Also, it is recommended that you clean the thermal head and paper feeding section whenever you replace the ink ribbon and paper roll.
To clean the thermal head
Note
Since the thermal head is still very hot just after printing is finished, be careful not to touch the thermal head when cleaning it. Touching the thermal head may burn you and may cause damage to the thermal head.
Clean the thermal head with a soft cloth moistened with ethyl alcohol.
Note
Do not use a fuzzy cloth.
To clean the paper feeding section
7 Put the paper core shaft, without a paper roll, inside the printer.
8 Close the front door.
9 Put the printer back in its original packing material.
Cleaning
When the cabinet becomes dirty
Clean the cabinet with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of solvent, such as alcohol or benzine, or a chemical cloth, which may damage the finish.
Paper tray section
Guide rollers
Bottom section
Clean the guide rollers gently with a soft cloth moistened with water while turning them.
20 Precautions