To attach the holder clip to the microphone
Push the holder clip against the bottom of the microphone until the holder clip clicks into place.
To take the slack out of the microphone cable
Run the cable through the clamping part of the holder clip.
To attach the wind screen to the microphone
Insert the microphone into the hole at the bottom of the windscreen.
To attach the belt clip
Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side.
To remove the belt clip
Insert a pointed object such as a ballpoint pen between the belt clip and the transmitter to make some space between them, and then remove the end of the belt clip from the hole on the side of the transmitter.
38 Attachment and Installation Procedures