Specifications

Design and specifications are subject to change without notice.

Note

Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.

Transmitters (UTX-B2/H2/ P1)

Items common to all transmitters

Oscillator type

Crystal-controlled PLL synthesizer Carrier frequencies

Model available in USA: 566 to 590 MHz (U30 model), 638 to 662 MHz (U42 model)

Model available in Europe: 798 to 822 MHz (CE62 model), 838 to 862 MHz (CE67 model)

Operating frequency band 24 MHz BW

Pre-emphasis

50µs

Distortion

1.0% or less (–60 dBV, 1 kHz input)

Signal-to-noise ratio

60 dB or more Tone signal

32kHz

Attenuation

0to 21 dB, in 3-dB steps

Display

Channel, frequency, audio level, RF level, accumulated use time

Power requirements

3.0 V DC (two LR6/AA size alkaline batteries)

Operating temperature

0°C to 50°C (32°F to 122°F) Storage temperature

–20°C to +55°C (–4°F to +131°F)

Body-pack transmitter (UTX- B2)

Antenna

1/4λ wave length wire Audio input connector

3.5-mm dia. mini jack Reference audio input level

–60 dBV (at 0 dB attenuation level) RF output level

30 mW/5 mW selectable Reference deviation

±7 kHz (–60 dBV, 1 kHz input) Frequency response

40 Hz to 18 kHz Indicator

AF/PEAK level Battery life

Approx. 8 hours (measured with two Sony LR6/AA size alkaline batteries at 25°C (77°F), with output power of 30 mW)

Specifications 59