n 91 N

Upgrading Your VAIO Computer

9Locate the center notch (4) on the bottom edge of the memory module and align it to the center bump in the open module slot.

10Firmly insert the lower edge of the module (5) into the slot by pressing down evenly against the module's upper corners. The side latches (6) snap into position, holding the memory module in place.

!

To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to relieve pressure.

11Replace the graphic card, connect the cable, and tighten the screw.12Replace the top panel.See Closing the Computer (page 86) for the detailed instructions.