Sony Viao PictureBook Computer manual Connecting to a Local Area Network, Connecting to LAN

Connecting to a Local Area Network

Connecting to a Local Area Network

You can connect your computer to 10BASE-T and 100BASE-TX-type Local Area Networks (LANs) by using the supplied port replicator and its Ethernet port. For the detailed settings and devices needed to connect to the network, ask your network administrator.

Connecting to LAN

Ethernet port

Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet port. Do not connect any other type of network cable or any telephone line. Connecting cables other than those listed above may result in an electric current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the unit to the network, contact your network administrator.

If you enable Wake on LAN, the power saving mode will be switched to Standby mode.

To set up your ethernet connection

To connect to a network:

41