Control Panel

LAMP/COVER TEMP/FAN

POWERSAVING

ON/STANDBY

MENU

 

POWER

 

 

INPUT

ENTER

RESET

APA

1I / 1 (on/standby) key

Turns on and off the projector when the projector is in standby mode. The ON/ STANDBY indicator lights in green when the power is turned on.

When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about one second.

For details on steps for turning off the power, see “To turn off the power” on page 23.

2APA (Auto Pixel Alignment) key

Adjusts a picture clearest automatically while a signal is input from a computer.

3INPUT key

Selects the input signal. Each time you press the key, the input signal switches as follows:

INPUT AtINPUT BtMStVIDEOtS VIDEO

t

4RESET key

Resets the value of an item back to its factory preset value. This key functions when the menu or a setting item is displayed on the screen.

5 Arrow keys (M/m/</,)

Select the menu or to make various adjustments.

6ENTER key

Enters the settings of items in the menu system.

7MENU key

Displays the on-screen menu. Press again to clear the menu.

8Indicators

•LAMP/COVER: Lights up or flashes under the following conditions:

–Lights up when the lamp has reached the end of its life or becomes a high temperature.

–Flashes when the lamp cover is not secured firmly or the front cover is kept closed and the lamp goes out.

•TEMP (Temperature)/FAN: Lights up or flashes under the following conditions:

–Lights up when temperature inside the projector becomes unusually high.

–Flashes when the fan is broken.

•POWER SAVING: Lights up when the projector is in power saving mode. When POWER SAVING in the SET SETTING menu is set to ON, the projector goes into power saving mode if no signal is input for 10 minutes. Although the lamp goes out, the cooling fan keeps running. In power saving mode, no keys function for the first 60 seconds. The power saving mode is canceled when a signal is input or any key is pressed.

•ON/STANDBY: Lights up or flashes under the following conditions:

–Lights in red when a AC power cord is plugged into a wall outlet. Once in standby mode, you can turn on the projector with the I / 1 key.

–Lights in green when the power is turned on.

–Flashes in green while the cooling fan runs after the power is turned off with the I / 1 key. The fan runs for about 90 seconds after the power is turned off.

The ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you

GB 10 Location and Function of Controls