Sony VPD-MX10 LMP-M130, Be sure to use the, If you use lamps other than, Turn the projector back over, Cleaning the ventilation holes, to avoid electrical shock or fire

Turn the projector back over.

4 Insert the new lamp all the way in untilit is securely in place. Tighten the screws. Fold up the handle.

Cleaning the ventilation holesRemove dust from the outside of the ventilation holes with a vacuum cleaner.

Notes

•Be careful not to touch the glass surface of the lamp.•The power will not turn on if the lamp is not secured properly.5 Close the lamp cover and tighten the screws.

6

7 Connect the power cord and turn the projector to standby mode.

8 Press the following keys on the control panel in the following order for less than five seconds each: RESET, <, ,, ENTER.

Notes

•Be sure to use the LMP-M130 Projector Lamp for replacement. If you use lamps other than LMP-M130, the projector may cause a malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

•Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire.

GB 32 Maintenance