Features
High brightness, high picture qualityHigh brightnessAdoption of Sony’s unique optical system provides a
Three
Three
In addition to the front floor or ceiling installation, you can install the projector by tilting it 90 degrees at the rear or 90 degrees in front.
Direct Power On/Off functionThe AC power of the entire system can be directly turned on/off with a breaker or other switch without pressing the power key on the projector.
Simple maintenanceEven when the projector is mounted on the ceiling you can change the lamp or clean the air filter easily because the replacement lamp is located at the rear of the projector and the air filter is located at the front of the
projector. Clean the air filter whenever you replace the lamp.
ID functionThe function allows you to adjust or control each projector individually with one Remote Commander when you use two or more projectors in one room.
System expandability using a networkConnection to a LAN allows you to turn the projector on/off away from the installation location via a Web browser or to obtain projector status information such as the lamp timer.
Side ShotThe projector supports the Side Shot feature (horizontal trapezoidal correction function), enabling projection from the side of the screen. Installation becomes possible in a wider variety of locations.
Security FunctionsSecurity lockThis function makes it possible to prevent projection of a picture on the screen unless the required password is entered when the projector is turned on.
Panel key lockThis function locks all the keys on the control panel of the projector, allowing use of the keys on the Remote Commander. This prevents the projector from operating incorrectly.
Network PresentationAny image of a computer, if it is connected to a LAN by wired or wireless connection, can be projected by connecting a network cable to the NETWORK connector
For details, refer to the “Operating Instructions for Network.”
Overview
Features 11