The Installation Menu
The Installation menu is used for changing the settings of the projector.
Picture | V Keystone: | Auto |
|
Side Shot: | 0 |
| |
|
| ||
Signal | Image Flip: | Off |
|
Background: | Blue |
| |
|
| ||
Function | Lamp Mode: | Standard |
|
| IR Receiver: | Front & Rear |
|
Installation | ID Mode: | All |
|
| Direct Power On: | Off |
|
Setup | High Altitude Mode: | Off |
|
Information |
|
|
|
| Sel: | Set: | Exit: |
Setting items | Functions |
| Initial setting |
V Keystone | Corrects the trapezoidal distortion caused by the projection | Auto | |
| angle. Select “Auto” for automatic correction, or “Manual” |
| |
| for manual correction using the v/V/b/B keys. |
|
|
| When the bottom of the trapezoid is longer than the top |
| |
| : Sets a lower value. |
|
|
| When the top of the trapezoid is longer than the bottom |
| |
| : Sets a higher value. |
|
|
|
|
| |
Side Shot | Corrects the horizontal trapezoidal distortion of the picture | 0 | |
using the v/V/b/B keys. |
|
| |
CX155/CW125 | When the right side is longer than the left side ( | ) |
|
only) | Set to a higher value (+ direction). |
|
|
| When the left side is longer than the right side ( | ) |
|
| Set to a lower value (– direction). |
|
|
| Set the adjustment level to “0” if you want to adjust the |
| |
| picture more widely using “V Keystone” only. |
|
|
|
|
| |
Image Flip | Flips the image on the screen horizontally and/or vertically. | Off | |
| • Off: The image does not flip. |
|
|
| • HV: Flips the image horizontally and vertically. |
|
|
| • H: Flips the image horizontally. |
|
|
| • V: Flips the image vertically. |
|
|
|
|
| |
Background | Selects the background color of the screen when no signal | Blue | |
| is input to the projector. Select “Black” or “Blue.” |
|
|
| Normally, set to “Blue.” |
|
|
|
|
|
|
Lamp Mode | Sets the lamp brightness used during the projection. |
| Standard |
| • High: Illuminates the projected image brightly. |
|
|
| • Standard: Reduces fan noise and power consumption. |
| |
| The brightness of the projected image will be lower |
|
|
| compared with the “High” setting. |
|
|
|
|
| |
IR Receiver | Selects the remote control detectors (IR Receiver) on the | Front & Rear | |
| front and rear of the projector. |
|
|
| • Front & Rear: Activates both the front and rear |
|
|
| detectors. |
|
|
| • Front: Activates the front detector only. |
|
|
| • Rear: Activates the rear detector only. |
|
|
|
|
|
|
Menu a Using Settings and Adjustments
The Installation Menu 41