Control Panel

1 2 3 4 5 6 7 8

LAMP/

ON/

INPUT

KEYSTONE

MENU

PUSH

PIC

COVER

STANDBY

ENTER

MUTING

 

 

 

Overview

aLAMP/COVER indicators

Flashes in orange under the following conditions:

•A reception rate of 2 flashes when the lamp cover or air filter cover is not secured firmly.

•A reception rate of 3 flashes when the lamp has reached the end of its life or reaches a high temperature.

For details, see page 51.

bON/STANDBY indicator

Lights up or flashes under the following conditions:

–Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 key.

–Flashes in red when the internal temperature is high or the electrical system has failed.

–Lights in green when the projector is turned on, and when it is ready to operate.

–Flashes in green from the time when the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key. The fan runs for about 60 seconds after the power is turned off.

–Lights in orange when the power saving mode is on.

For details, see page 51.

c?/1 (On/Standby) key

Turns on the projector when it is in standby mode. When you push this key, the ON/STANDBY indicator flashes in green and then lights in green when the projector is ready to operate.

To turn off the power, press the ?/1 key twice according to the message or hold the ?/1 key for about one second.

dINPUT key

Select the input signal. Each time you press the key the input signal switches.

eKEYSTONE (Trapezoidal distortion correction) key

Adjusts the trapezoidal distortion of the image. Pressing this key, V KEYSTONE (Vertical trapezoidal distortion correction) adjustment menu is displayed. Use the arrow keys (v/V/b/ B) for adjustment.

In the case of models VPL-CX125/ CX155/CW125, Side Shot (Horizontal trapezoid distortion correction) can be adjusted by pressing this button again. Adjust it by the v/V/b/B key.

Location and Function of Controls (Main Unit)

15