hPIC MUTING keyiD ZOOM (Digital Zoom) +/– key

Enlarges the image at a desired location on the screen.

jInfrared transmitterk?/1 (On/Standby) keylv/V/b/B (Arrow) keysmENTER keynMENU keyoVOLUME +/– keyspAUDIO MUTING key

Press to temporarily cut off the audio output from the speaker and from the AUDIO jack of the OUTPUT. Press again or press the VOLUME + key to restore the sound.

Before using the RemoteCommander

Pull out the clear film from the lithium battery holder.

To replace a battery

1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander.

2 Install the lithium battery.

Face the + side up.

3 Put the lithium battery holder back into the Remote Commander.

Notes on the lithium battery

•A button type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than CR2025.

•Keep the lithium battery out of the reach of children.

•Should the battery be swallowed, immediately consult a doctor.

Notes on Remote Commander operation

•Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the remote control detector.

•The operation range is limited. The shorter the distance between the Remote Commander and the remote control detector is, the wider the angle within which the commander can control the projector becomes.

20 Remote Commander