Sony VPL-CX100 Off:, Standby:, Lamp off:

Setting items	Functions	Initial setting
Power Saving	Selects the Power Saving mode.	Off
	• Lamp off: The lamp goes off if no signal is input for
	10 minutes. The lamp lights again when a signal is
	input or any key is pressed.
	• Standby: The projector goes into Standby mode if
	no signal is input for 10 minutes. To use it, turn on
	the power again.
	• Off: The projector does not go into Power Saving
	mode.
Panel Key Lock	Locks all the control panel keys on the top of the	Off
	projector so that the projector can be operated only
	with the Remote Commander.
	To lock the control panel keys, set to “On.”
	When it is set to “On,” keeping the ?/1 key on the
	control panel pressed for 10 seconds turns the projector
	on when it is in standby mode, and turns the projector
	to standby mode when the power is on. If you press
	and hold the MENU key for about 10 seconds when
	the power is on, the lock will be released and “Panel
	Key Lock” is automatically set to “Off.”
Security Lock	Turns on the projector’s security lock function.	Off
	When set to “On,” turns on the security lock function,
	which locks the projector once a password has been
	set.
	For details, see “Security Lock” on page 30.

Notes

•Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen.

•You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.

•The picture may not be adjusted properly depending on the type of input signal.

•While WXGA signal (1280×768/1360×768) is being input, the adjustment process of when Smart APA is set to "On" may differ from when the APA key on the remote commander is pressed.

•Adjust the “Dot Phase,” “H Size,” and “Shift” items on the Signal menu when you adjust the picture manually.

•When “Standby mode” is set to “Low”, the network presentation and the network control functions cannot be used in standby mode.

40 The Function Menu