Control Panel

MENU

APA

 

CONT

I /

ET

 

ENTERRESET

INP

INPUT VOLUME

INP

a I / 1 (on/standby) key

Turns on and off the projector when the projector is in standby mode. The ON/ STANDBY indicator lights in green when the power is turned on.

When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about one second.

For details on steps for turning off the power, see “To turn off the power” on page 27.

bMENU key

Displays the on-screen menu. Press again to clear the menu.

cArrow keys (M/m/</,)

Used to select the menu or to make various adjustments.

dAPA (Auto Pixel Alignment) key

Pressing this key while a signal from a computer is being input automatically adjusts the picture so that it can be seen clearly. This function also simultaneously adjusts the screen size and makes up/down and left/right shift adjustments.

Note

Press the APA key when the full image is displayed on the screen. If the projected image includes a large black area around the periphery, the APA function will not function properly and in some cases, portions of the image may not be displayed.

•You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.

•The picture may not be adjusted properly depending on the kinds of input signals.

•Adjust the items “Dot Phase,” “H Size” and “Shift” in the INPUT SETTING menu when you adjust the picture manually.

eRESET key

Resets the value of an item back to its factory preset value. This key functions when the menu or a setting item is displayed on the screen.

fVOLUME +/– key

Adjusts the volume of the built-in speakers and output level of the AUDIO jack.

+:Increases the volume.

–:Decreases the volume.

gENTER key

Enters the settings of items in the menu system.

hINPUT key

Selects the input signal. Each time you press the key, the input signal switches as follows:

t INPUT A t INPUT B t INPUT C t

S VIDEO T VIDEO T INPUT D

The audio signals are common to the INPUT B, INPUT C, VIDEO and S-VIDEO.

Overview

Location and Function of Controls 11