Note

You will not be able to use the projector if you forget your password and the password administrator is not available. Be please aware that using the security lock can prevent valid usage in such cases.

1 Press the MENU key and then, in the INSTALL SETTING menu, turn on the security lock setting.

2 Enter the password.

Use the MENU, M/m/</,, and ENTER keys to enter the four-digit password. (The default setting is “ENTER, ENTER, ENTER, ENTER.”) Next, the screen for entering the new password is displayed. (Enter the password at this screen even if you want to keep the current password.)

Enter password key

Use:

Cancel: Other key

3 Enter the password again to confirm.

If “Invalid Password!” is displayed on the menu screen, perform again from step 1.

INSTALL SETTING

X Input A

V Keystone:

0

Image Flip:

Off

Background:

Blue

Lamp Mode:

Standard

Direct Power On: Off

High Altitude Mode: Off

Security Lock: Off

Invalid Password!

4 Turn the main power off and disconnect the AC power cord.

The security lock is set to on, then it becomes effective. The screen for entering the password is displayed when the power is turned on the next time.

Security certification

When the screen for entering the password is displayed, enter the password that was set. If you fail to enter the correct password after three tries, the projector cannot be used. In this case, press the I / 1 key to turn off the power.

To cancel the security lock

1 Press the MENU key, then turn off the “Security Lock” setting in the INSTALL SETTING menu.

26 Projecting