5 Insert the new lamp all the way in until
it is securely in place. Tighten the screws. Fold up the handle.
Notes
• Be careful not to touch the glass surface of the lamp.
• The power will not turn on if the lamp is not secured properly.
6 Close the lamp cover and tighten the screws.
Note
Do not tighten the screws too much. Doing so could damage some of the internal components of the projector.
7 Turn the projector back over.
8 Connect the power cord and turn the projector to standby mode.
9 Press the following keys on the control panel in the following sequence for less than five seconds each: RESET, <, ,, ENTER.
Caution
Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire.
Disposal of the used lampFor the customers in the USA

This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or Electronics Industries Alliance (http://www.eiae.org).

Maintenance

Replacing the Lamp 43