Controlling the Projector from a Computer

Click “Control.”

You can perform various adjustments and settings of the projector on a computer display.

The function of the buttons in the windows are the same as those on the remote control supplied with the projector.

The present setting status is indicated

If you change the setting using the remote control, click “Refresh” in the upper right- hand corner of the window to update the status.

Setting Up the

Projector

Click “Setup.”

The Password Properties dialog box appears.

The name of the “User” account is preset without a password to “root” at the factory. You can set the owner information, date and time, Mail Report, etc.

Click “Apply” in the lower part of each window to update the projector to the data input in each window.

Owner information

This information is used for the Mail Report function.

Owner

Enter owner information.

Projector

Enter the location and lens type of the projector.

38 Controlling the Projector from a Computer / Setting Up the Projector