BOperation and Administration using a Network

Accessing the Projector from a Computer

You can check the present status of the projector on a computer display and control the projector from a computer. Also, the projector enables the sending of mail that contains messages on the time for replacement of the projector lamp, error occurrences, etc., to mail addresses that have been specified.

Before operating

Confirm that the projector is connected to the LAN, then turn on the projector. For details on connection, consult with your network administrator.

1 Start Internet Explorer 5.0 (or later versions) on your computer.

2 Type “http://xxx.xxx.xxx.xxx (the IP address of the projector)” as the “Address,” then press the ENTER key.

You can confirm the IP address of the projector in the “Information menu” on page 36.

note

When you access the projector via a Web browser, do not use a proxy server.

Checking the Status of the Projector

Click “Information.”

You can check the information and present status of the projector on a computer display. You can check the information and status in the window, but you cannot change the settings.

a using Administration and Operation

Enter the IP address here.

INFORMATION

The present status of the projector is displayed.

MENU

The present settings of the projector are displayed.

Network

Accessing the Projector from a Computer / Checking the Status of the Projector 37