Sony VPL-VW60 48

Function Menu

The Function menu is used for changing the settings of the various functions of the projector.

HDMI Control	Selects the function whether to turn the HDMI Control function
	effective, when the HDMI 1 INPUT and HDMI 2 INPUT
	connectors are connected to an HDMI control compatible
	equipment.
	HDMI Control: When set to “On”, the HDMI Control function is
		turned effective and the following settings can be assigned.
	PJ→HDMI Power Sync: When set to on “On”, the projector is
		powered off while the HDMI control compatible equipment
		connected to the projector is also powered off at the same time.
	HDMI→PJ Power Sync: When set to “On”, the HDMI control
		compatible equipment connected to the projector is automatically
		powered on or played back, etc., while the projector is also
		powered on at the same time.
	HDMI Device List: Lists all the HDMI control compatible
		equipment connected to the HDMI 1 and HDMI 2 INPUT
		connectors of the projector.

		Notes
	• When “Standby Mode” is set to “Low”, this item will not operate.
	• To operate the connected equipment, be sure the equipment is
		HDMI control compatible and assign the appropriate settings to
		use the HDMI Control function.
		For details, see “About the HDMI Control” (1 page 53).

Auto Input Search	Detects the input signal and displays the detected input signal
	automatically when the INPUT button is pressed.
	When set to “On”, the projector detects whether a Component,
	HDMI 1, HDMI 2, Video, S-video or Input-A signal is input when
	the input terminal with effective signals is automatically selected by
	pressing INPUT. Set this to “Off” when you want to select an input
	selector with no input signal, or you want to switch the setting
	manually.

48

Contents

VPL-VW60 For customers in the USA Declaration of Conformity Disposal of Used Lamp For customers in the United States For customers in Europe Trademark Information Page Table of Contents Location of Controls Connections and Preparations Projecting Others On safety On preventing internal heat buildup Caution On repacking Location of Controls Page Page Connections and Preparations Before Setting Up the Projector Improper use Do not do any of the following while using the projector Blocking the ventilation holes Tip Tilting front/rear and left/right Positioning the Projector and a screen When using the 16:9 aspect ratio screen When using the 4:3 aspect ratio screen (projecting a 4:3 picture) 2 Position the projector so that the lens is parallel to the screen Top view Connecting to a VCR Page To connect to a VCR equipped with the S video connector or video connector Connecting to a Computer Page 2 Press the ?/1 (ON/STANDBY) switch to turn on the projector 3 Turn on the equipment connected to the projector 4 Press INPUT to project the picture on the screen 5 Adjust the vertical picture position 6 Adjust the picture size 7 Adjust the focus To adjust the tilt of the installation surface 1 Press MENU 2 Press M/m to select the Setup menu, and press , or 3 Press M/m to select “Language,” and press , or 4 Press M/m/</, to select a language, and press To clear the menu Projecting Turning Off the Power Press WIDE MODE Wide Zoom Normal Full Zoom Anamorphic Zoom Full1 (When the PC signal is input) Full2 (When the PC signal is input) Notes on selecting the wide screen mode Press one of the PICTURE MODE buttons (DYNAMIC, STANDARD, CINEMA and USER 1, USER 2 and USER 3) DYNAMIC STANDARD CINEMA Selecting to directly adjust the desired menu item Selecting desired adjust menu items in the order 1 Press RCP on the remote control 2 Press M/m to select “User1,” “User2” or “User3,” then press 3 Select the target color you want to adjust 4 Adjust the color of the specified portions 5 After the adjustment is complete, press Using the Menus 2 Press M/m to select a menu item, and press , or ,or 4 Make the setting or adjustment of an item When changing the adjustment level Items that cannot be adjusted To reset the picture that has been adjusted To reset the items that have been adjusted Page Page Page Page Page Page Page Page Page Page Page Page About the Preset Memory No Others Power Picture On-screendisplay Remote control Others Warning Indicators Message Lists Warning messages Caution messages Tools you need to get started: Standard Phillips screwdriver Cloth (for scratch protection) 1 Turn off the projector and unplug the AC power cord 6Close the lamp cover, then tighten the screws Remove the filter holder Remove the air filter 10 Attach the filter holder 11 Wipe dust off the Ventilation holes (intake) with a soft cloth 12 Place the project back on its original position 13 Turn on the projector, then select the desired setting item on the Setup menu. The menu screen below will be appeared Page System Input General Supplied accessories Optional accessories Preset Signals Page Preset memory numbers for each input signal Analog signal Digital signal Input Signals and Adjustable/Setting Items Screen menu When Using the PSS-H10Projector Suspension Support When using the 4:3 aspect ratio screen Attaching the PSS-H10projector suspension support Top view Front view Side view Tools you need to get started Phillips screwdriver: 110 mm (4 3/8 inches) or longer Flat-headscrewdriver: 110 mm (4 3/8 inches) or longer When using the 16:9 screen 5 Attach the ring (washer) by turning it clockwise