Sony VPL-VW60 manual 45

Screen Area	Selects the size of the picture when a Hi-Vision picture is
	overscanned.
	Full: Expands the picture on the whole of the screen.
	Through: Does not expands the picture on the whole of the screen.
		Note
	This item is effective only when a Hi-Vision signal (preset memory No.
	7, 8, 9, 12, 13 and 14) is input and “On” is selected in “Over Scan”.
V Center	Adjust the whole picture by moving up and down on the screen.
	As the selected number increases, the screen moves up, and as the			Using
	selected number decreases, the screen moves down.
		Note	the
	This item is adjustable only when “Zoom” is selected.
				Menus
Vertical Size	Reduces or enlarges the picture vertically.
	The screen is enlarged as the setting increases and reduced as the setting
	decreases. If the subtitle of a movie, etc. cannot be seen, use this together
	with “V Center”.
		Note
	This item is adjustable only when “Zoom” is selected.
Adjust Signal	You can adjust the input signal.
	APA: Adjusts the position of the image signal automatically for
		“Phase”, “Pitch”, and “Shift”.
	Phase: Adjusts the dot phase of the panel and the computer signal.
		Adjust the picture to the point where it looks clearest.
	Pitch: Adjusts the horizontal size of the picture from a computer.
		The higher the setting, the wider the picture. The lower the setting, the
		narrower the picture. Adjust the setting to match the number of dots of
		the input signal.
	Shift: Adjusts the position of the picture.
		H: As the setting for H (horizontal) increases, the picture moves
			to the right, and as the setting decreases, the picture moves to
			the left. Use < / , to adjust the horizontal position.
		V: As the setting for V (vertical) increases, the picture moves up,
			and as the setting decreases, the picture moves down. Use M /
			m to adjust the vertical position.

45