Blanking

This feature allows you to adjust the displayable region within

 

the four directions of the screen.

 

Select each screen edge “left / right / top / bottom” on the Blanking

 

adjustment screen with M / m buttons. Adjust the desired Blanking

 

value with < / , button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

When both the “Blanking” and the “V Keystone” are adjusted at the

 

same time, the “Blanking” cannot be adjusted correctly. When using

 

the “Blanking”, make sure that you set the “V Keystone” to “0”.

 

 

 

 

 

 

 

Panel Alignment

This feature allows you to adjust the gaps in the color of

 

characters or the picture.

 

When set to “On”, the “Adjust Color” and the “Pattern Color” can be

 

assigned and adjusted.

 

Adjust Color: Assigns the desired color to adjust the gaps in color.

 

Select “R” (Red) or “B” (Blue) to make adjustments based on “G”

 

(Green).

 

Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White,

 

all colors) when the “Adjust Color” is “R” (Red). Select “B/G”

 

(Blue and Green) or “R/G/B” (White, all colors) only when the

 

“Adjust Color” is “B” (Blue).

 

Adjust: Assign the settings of the horizontal direction (H) with

 

< / , buttons and the vertical direction (V) with M / m buttons

 

on the Shift Adjust screen. The colors selected in the “Adjust

 

Color” can be adjusted with the < / ,, M / m buttons in each

 

direction.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset: Returns to the factory settings.

Note

Depending on the adjustments made above, the number of display pixel may decrease. Also, colors may become uneven or the resolution may change.

Tip

If colors appear on the edge of the screen after making the adjustments above, adjust the region of the picture to display with “Blanking” in the Installation menu. (1 page 51)

Menus the Using

51