![](/images/backgrounds/145027/145027-8027x1.png)
Projecting
This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste.
Projecting the Picture on the Screen
1 Power on both the equipment and the device connected to the equipment.2 Press INPUT repeatedly to select the input you want to project on the screen.Display the indication of the input you want.
Projecting
Example: To view the picture from the video equipment connected to the VIDEO INPUT connector.
To view the picture from | Press INPUT to display |
|
|
Video equipment connected to the VIDEO INPUT connector | Video |
|
|
Video equipment connected to S VIDEO INPUT connector | |
|
|
Component equipment connected to Y PB/CB PR/CR on the projector | Component |
|
|
RGB/component equipment connected to the INPUT A connector | |
|
|
Equipment connected to the HDMI 1 connector | HDMI1** |
|
|
Equipment connected to the HDMI 2 connector | HDMI2** |
|
|
*Set the menu according to the signal input. When you set it to “Auto,” and cannot display the picture properly, select an appropriate signal according to the input signal. (1 page 47, 52)
**The color gradation of the dark area or the bright area may become unclear when a signal other than those from HDMI standard is input. Adjust the “Brightness” and the “Contrast” in the
27