Limiters
Be absolutely sure to set the limiters (travel range) of the pan/tilt head before use. Depending on where the pan/tilt head system has been installed, obstacles may be present within the travel range with which the camera may come into contact. Contact with any such obstacle by the camera may cause malfunctioning or accidents.
In this case, contact can be prevented by setting the limiters directly before any such obstacle.
Multi function controller
The positions of four limiters — namely, the upper, lower,
Once they have been set, the positions will not be lost even after the power has been turned off.
Setting the limiters
• Setting the upper limit of operating range
1.Operate the controller, and turn the camera to the position which will serve as the upper limit.
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47.
3.The setting is completed when TRACING/PRESET MEMORY button 41 [LIMIT ON] lights.
4.Operate the controller, and check that the upper limit has been set properly.
• Setting the lower limit of operating range
1.Operate the controller, and turn the camera to the position which will serve as the lower limit.
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46.
3.The setting is completed when TRACING/PRESET MEMORY button 41 [LIMIT ON] lights.
4.Operate the controller, and check that the lower limit has been set properly.
• Setting the
1.Operate the controller, and turn the camera to the position which will serve as the
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44.
3.The setting is completed when TRACING/PRESET MEMORY button 41 [LIMIT ON] lights.
4.Operate the controller, and check that the
• Setting the
1.Operate the controller, and turn the camera to the position which will serve as the
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45.
3.The setting is completed when TRACING/PRESET MEMORY button 41 [LIMIT ON] lights.
4.Operate the controller, and check that the
32