Panasonic AW-PH650N manual Mounting AC adapter, Precautions for installation, How to install

Mounting (AC adapter)

Precautions for installation

Be sure to use water-proof connecting cables.

Be sure to keep AC power switched off during installation and connection.

Before pressing the power switch on, make sure that all parts, including the housing and pan/tilt head, have been installed and connected completely and free of errors.

Do not install the AC adapter at a cold place [below –4°F (–20°C)] or a hot place [over 113°F (45°C)] because extremely low or high temperature will cause operation instability.

How to install

Fasten the pole mounting plate (supplied) and the belt (to be locally purchased) on the back of the AC adapter with the four bolts, flat washers and spring washers (For M8: supplied).

Pole mounting plate

Belt [width: 1-3/4” (45 mm) or less]

Spring washers

Flat washers Bolts (4 pcs.)

Fasten the AC adapter to the pole using the pole mounting plate and the belt.

4-3/4”	7-7/8”
(121 mm)	(200 mm)

Pole

ø7-7/8” (200 mm)

2-7/16”	(62 mm)
3-7/8”	(98 mm)

11” (280 mm)

5-3/4”

(146 mm)

7