Connections
Concerning the connectors inside the housing
The connectors shown in the figure below are provided inside the housing. Check the connection instructions for each of the cameras concerned, and connect them.
| | | | |
LENS I/F (1) connector | CAMERA I/F connector |
This is provided for controlling the zooming and focusing of the motorized lens unit. Connect the remote (zoom/ focus) control cable of the motorized lens unit to this connector.
ND/EXT connector
This is provided for controlling the ND filter or lens extender of the motorized lens unit. Connect it when using a motorized lens unit with an ND filter or lens extender function.
LENS I/F (2) connector
Connect this when using a Canon IAS lens, WAS lens or VAS lens or a Fujinon RD lens.
Check that the lens can be stowed inside the housing, because some lenses cannot be stowed according to the position of the connector on the bottom the lens.
LENS I/F (2) control selector switch [Shipment setting: Fujinon]
Set the LENS I/F (2) control selector switch to the position that corresponds to the lens used.
Fujinon: RD lens made by Fujinon
Canon: IAS lens, WAS lens or VAS lens made by Canon
This is provided for controlling a camera. Connect it to the camera REMOTE connector using the camera cable supplied with the
Camera control selector switch [Shipment setting: HRP]
Camera | Switch setting | |
Convertible camera | HRP | |
HRP | ||
| Control exercised | Control exercised |
from HRP150 | from CB400 | |
| HRP | CB400 |
• Use this switch at the HRP setting when using a convertible camera. It cannot be controlled from the
• Similarly, use the switch at the HRP setting when using the
• When using the
Set the switch to the HRP setting when exercising control from the
25
